[Elphel-support] 10359 different exposure times

[Andreas Bean]

Andrey,

I don't know where to find the register address of the exposure time
register.

Can I change the exposure time of an individual sensor with the fpcf
command?
If so, can you tell me command?

Andreas

Andrey Filippov schrieb:
> On Mon, Oct 25, 2010 at 10:21 AM, Andreas Bean <office at beanbox.com
> <mailto:office at beanbox.com>> wrote:
>
>     Hello,
>
>     Is it possible to have different exposure times for two sensors
>     connected to 10359 board?
>
>  
> Andreas,
>
> currently there is no driver support for different exposure times -
> exposure is one of the registers that is set as "common" to all
> sensors (WOI parameters are already separated). Eventually we'll
> probably add that, but currently you can only disable autoexposure (so
> driver will not try to write exposure in broadcast mode) and write
> data directly to the sensor i2c registers. Sensors are mapped to
> different ranges, so 0x4800..0x48ff is broadcast, 4a00..4aff,
> 4c00.4cff and 4e00.4eff are individual ranges for each of the sensor
> ports on the 10359.
>
> Andrey
>
>  

-------------- next part --------------
A non-text attachment was scrubbed...
Name: office.vcf
Type: text/x-vcard
Size: 230 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101106/c8120dcc/attachment.vcf>