[Elphel-support] Photo Finish Mode Issues in 353 FW 8.0.7

[Oleg K Dzhimiev]

I updated instructions on
http://wiki.elphel.com/index.php?title=Netboot_firmware_upgrade for camera
reflashing using netboot.

Oleg

On 5 November 2010 17:45, Andrey Filippov <andrey at elphel.com> wrote:

> On Fri, Nov 5, 2010 at 11:41 AM, Linden Mills-Connery <lmillsc at gmail.com>wrote:
>
>> My configuration:
>>   -Current Firmware Version: Elphel (R) Model 353 Camera release 8.0.7
>>   -FPGA Release Number: 3534011
>>   -Board: 10353
>>   -Sensor: MT9P001
>>
>>
> Linden, I'm sorry - that camera board was programmed at the factory and
> they are still using the older, more tested revision.
>
> Yes, Michael is right - the linescan mode code was resurrected at 8.0.8.7
> so you need to upgrade the firmware.
>
> Can you follow the instructions on
> http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu and
> install the development software?
>
> Current version is 8.0.9 - the only difference to the stable 8.0.8.48 (we
> used it for 2.5 months) is the support of the 4K sector disks, all the
> camera functionality is the same.
>
> Andrey
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101105/600a8cd4/attachment-0002.html>