[Elphel-support] firmware upgrade problem
Andrey Filippov
andrey at elphel.com
Fri Nov 5 15:18:28 PDT 2010
>
> 5) reboot & check the firmware.
>
You need to wait (2 minutes will be safe), or watch the serial output (if
you have 10369 board connected) before power-cycling, because even as the
program on a host computer exits after
>JUMP
> Exiting with code 0
the camera just starts re-flashing.
Andrey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20101105/9ecb7cb8/attachment-0002.html>
More information about the Support-list
mailing list