[Elphel-support] Streamer settings and SDP

[Scott Janz]

I have not tried to compile the distribution before but am willing to 
give it a try. Where in the code is the multicast address defined? I 
have seen this address in the parameter list but changing it there does 
not appear to do anything.

-scott

Stefan de Konink wrote:
> Op 08-03-10 19:15, Scott Janz schreef:
>   
>> unicast/udp without tcp acknowledgement is what we need. The stream
>> needs to be sent via UDP to a storage/wide-band router device.
>>     
>
> This should be possible by substituting the multicast address by the 
> target unicast adres. Can you try to compile this in yourself?
>
>
> Stefan
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>   

-- 

---------------------
Dr. Scott J. Janz
NASA/GSFC code 613.3
Building 33 Room E310
Greenbelt, MD 20771
ph. 301-614-5987
fax 301-614-5903