[Elphel-support] JTAG behaviour on 10359?

[René Doß]

Hallo,
        

I think  about to start with some hardware parts my development.
        
My prefered setup:

        
        10338 5M Pixel black/white Sensor
          |
          V
        10359 Sensor Multiplexor Board
          |
          V
        Adapter board
        with VGA plug, RS232, 3,3V Power, Jtag
        
        
        
My first question is the Jtag on 10359. There exist a switch for share
some wires. It is possible to program the FPGA with a normal JTAG
adapter or do you use a special timing or protocol?
I never used such special circuits in JTAG chains.
         
        
best regards
        
        
René Doß
        
        
        
        
        --
        Dossmatik GmbH
        Karlstraße 41
        04420 Markranstädt
        Tel. 034205/ 504072
        www.dossmatik.de
        
        Steuer-Nr.: 235/107/03650
        Amtsgericht Leipzig HRB 24467
        
        Geschäftsführer René Doß
        info at dossmatik.de
        
        

-- 
Dossmatik GmbH
Karlstraße 41
04420 Markranstädt
Tel. 034205/ 504072
www.dossmatik.de

Steuer-Nr.: 235/107/03650
Amtsgericht Leipzig HRB 24467

Geschäftsführer René Doß
info at dossmatik.de