[Elphel-support] EXIF TAGs Missing after upgrade

[Andrey Filippov]

On Sun, Feb 7, 2010 at 7:25 PM, Robbert <rma at vmsys.com> wrote:

I can not repeat this by upgrading the other camera from 8.0.3 to 8.0.7.
>

Hello Robbert,

It seems that the camera that is missing parameters was shipped to you
before we started  to put those extra parameters to all the cameras. You can
add the missing ones yourself using the web page at

 http://community.elphel.com/bootblock353/

Set your camera IP (defaulted to 192.168.0.9) and start with "Read system".
This program will not erase/overwrite anything, only add new parameters that
were never defined, so check for typos before pressing "PROGRAM" button. It
will be more difficult to overwrite wrong data - you'll have to do low level
reflash with clearing the boot block.

Andrey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100208/5ee4b470/attachment-0002.html>