[Elphel-support] Two technical question

[반명훈]

hello Elphel
this is kaien.
We use external trigger. (telephone-style connector, RJ14)
this camera is set up as below
TRIG_CONDITION => 0x200000
TRIG_OUT = > 0x800000 
TRIG => 0x4
new image is saving when trigger swich is on, at the same time previous image
saving procedure already is done.
thank you for help me to set up trigger.
We're going to save the images in two ways Trigger signal and udp signal
we transmit signals to camera by using udp and trigger signal. we do't use web
brower. 
the image is saved when the packet is transmitted to camera.
we could run image save sample program as we re-control use way of
"Imgsrv.c".
however the the whole image was not saved, just part of it.
i can send samples if you need.
And 
i'm wondering whether you know how to save the new image file when trigger
signal comes.
i want to make the program saved images when trigger signal transmit.
could you send any information regarding trigger signals.(trigger Out register
address..)
PS : 
i'd like to ask whether it is possible to change ISO value change of camera
Regards kaien
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20091204/f8b06a15/attachment-0002.html>