From ks at schaeffer-ag.de  Tue Feb  6 07:52:32 2024
From: ks at schaeffer-ag.de (Kai Schaeffer)
Date: Tue, 6 Feb 2024 16:52:32 +0100
Subject: [Elphel-support] Problem with reflashing of Elphel 353
In-Reply-To: <18d5675ed23.129cda7f02765439.3399087109875484765@support.elphel.com>
References: <7e1a7fb5-f73a-4bee-b6b6-ce7e888ab6a1@schaeffer-ag.de>
 <18d5675ed23.129cda7f02765439.3399087109875484765@support.elphel.com>
Message-ID: <e4489e46-941b-44f0-88d9-b8ff219a552c@schaeffer-ag.de>

Hi Andrey,

thank you for your answer and your offer to help. We actually have a 
bunch of boards which doesn't work anymore. If you can make some of them 
running again it would be great. Of course, I am willing to pay for it. 
Where should I sent them?

You can also send me a PM for the details.

Best regards,
Kai


Schaeffer AG
Dipl.-Phys. Kai Schaeffer      Vorstand
Nahmitzer Damm 32              Tel. +49-30-8058695-25
12277 Berlin                   FAX: +49-30-8058695-33
http://www.schaeffer-ag.de

HRB 93611 B, Amtsgericht Berlin Charlottenburg
Vorstand: J?rg Schaeffer, Kai Schaeffer
Aufsichtsrat: Dr. Karsten M?hlenfeld  (Vorsitzender)

Am 29.01.24 um 19:23 schrieb Elphel Support:
> Kai,
>
> We did not use 353 for for a long time, and yes, I know that the flash 
> memory in the camera deteriorates after years, so reflashing helps. I 
> have software installed on one computer and can try to reflash if you 
> send? us the camera boards.
>
> Andrey
>
>
>
> ---- On Sat, 20 Jan 2024 04:08:28 -0700 *Kai Schaeffer 
> <ks at schaeffer-ag.de>* wrote ---
>
>     Hi everyone,
>
>     I have a 353 based camera that is not reacting anymore. It's still
>     booting up and the LEDs on the network connector start to blink,
>     but I
>     can't access it. Also a ping is not working. So, I thought I
>     should try
>     to reflash it. I used the kubuntu-elphel-4.iso to do so. After some
>     difficulties, the reflashing is actually working now. During the
>     flashing I could even ping the camera (192.168.0.9) and login via
>     telnet. But after a reboot, the camera is still not accessible.
>
>     Actually I did something else: when I was still fighting with the
>     flashing, I took a fresh and working 353 controller board and
>     tried the
>     flashing there as well. So, now I also reflashed a working board
>     and it
>     stopped working after it. It's now the same behavior as with the
>     other one.
>
>     As the image I used the image353-8.2.16.tar.gz.
>
>     What am I doing wrong?
>
>     Thank you,
>     Kai
>
>
>     -- 
>     Schaeffer AG
>     Dipl.-Phys. Kai Schaeffer Vorstand
>     Nahmitzer Damm 32 Tel. +49-30-8058695-25
>     12277 Berlin FAX: +49-30-8058695-33
>     http://www.schaeffer-ag.de
>
>     HRB 93611 B, Amtsgericht Berlin Charlottenburg
>     Vorstand: J?rg Schaeffer, Kai Schaeffer
>     Aufsichtsrat: Dr. Karsten M?hlenfeld (Vorsitzender)
>
>
>     _______________________________________________
>     Support-list mailing list
>     Support-list at support.elphel.com
>     http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20240206/8044d81e/attachment.html>