[Elphel-support] about "103982"

[Elphel Support]

Dear Ali,



The new sensor will need new Verilog code for the sensor. I know developers in Lithuania were able to develop code for a smaller CMV300 as well as the PCB themselves.

And yes, the Linux driver will also be needed for it.



We can definitely help by consultations, and give the PCBs - just bare boards, not assembled/tested. We may get more involved if this project will be appropriately funded.



Andrey



---- On Wed, 28 Oct 2020 07:36:14 -0600 ali tamimi <tamimiali73 at gmail.com> wrote ----


Dear Andrey,



I like to complete this project (AMS sensors) , and also provided CMV8000 sensor. Can I count on your continual support? 

Actually I'm a HDL developer but there are many verilog and python codes and I'm a little confused and do not know which sections should be changed?  My question is which part of FPGA code should be changed or replaced ? Should Python and PHP codes be changed as well? What about Linux kernel drivers?

We have started PCB design . Could I send the PCB file and ask for your comments?



Ali



On Tue, Oct 27, 2020 at 5:14 PM Elphel Support <mailto:support-list at support.elphel.com> wrote:

Dear Ali,



We developed the PCBs for CMV12000 for our customer who decided to cancel the project. So we have the boards built, but we never assembled and tested them and we haven't designed  FPGA and firmware code. We may revive this project in the future, but our current focus is on long-range 3D with visible and infrared cameras, and for visible range we prefer rolling shutter, not the snapshot ones.



Andrey



---- On Tue, 27 Oct 2020 02:15:32 -0600 ali tamimi <mailto:tamimiali73 at gmail.com> wrote ----


Dear All

I was browsing your website that saw a long list of sensors will be supported in future . It is a remarkable achievement  if  all of  various sensors are supported in future. 

As you mentioned the "103982" board for the sensor front end CMV12000 can be connected to 10393. You put PCB files but don't explain about software requirements. Is there any special driver for it; or need code change? 

Another question, why do you not mention CMV12000 in the main list of supported sensors?

I provide CMV8000 and want to drive it with your product "10393" and need your help to do that. It makes me proud to be part of your community and collaborate in your project.

best regards


_______________________________________________
Support-list mailing list 
mailto:Support-list at support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com 










_______________________________________________
Support-list mailing list 
mailto:Support-list at support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20201030/14b2207d/attachment.html>