[Elphel-support] the question about your product.

[Elphel Support]

We have several sensor boards, some are tested, some just designed.

In addition to the 10338 (https://wiki.elphel.com/wiki/10338) and https://wiki.elphel.com/wiki/10398) we have


103992 for Flir Lepton3.5 https://wiki.elphel.com/wiki/103992




and designs:
103981 for AR1820 https://wiki.elphel.com/wiki/103981



103892/3/4 for CMV1200 https://wiki.elphel.com/wiki/103982



103991 for ATTO320 and ATTO640 - https://wiki.elphel.com/wiki/103991



Most image sensors are compatible with the 10393 system boards, but require sensor-specific adapter boards, each of the links above contain circuit diagram and Gerber files that you may use as an example. Additionally new sensors need customization of the FPGA (Verilog) and drivers (C) - all source code is available in our git repository mirrored at GitHub.





Andrey







---- On Sat, 30 Nov 2019 04:15:49 -0800 Mas Ard <mailto:msdardini at yahoo.com> wrote ----



Dear All,



I recently read about your Products and would like to know more, I would like setup a camera with bigger pixel size and have some experience to design and Implementation electrical board.

  

Do your camera support only 13338(MT9P031/MT9P001) and 10398(http://www.onsemi.com/pub_link/Collateral/MT9F002-D.PDF)
 as sensor, otherwise can you help me how can I choose other sensor? Or 
what class of image sensors are compatible with your products? Is  there
 any limitation that I have to consider it when I browse mouser.com or 
other distributors?



Thank you for your help.



Yours faithfully
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20191202/b7d0745a/attachment.html>