[Elphel-support] Sensor Flex cable

[Elphel Support]

Richard, These are custom cables with ground lines shielding data lines and wide power lines, and their width is lower than regular cables so it is easier to route them too. I would definitely recommend them for production systems. For quick experiments you may use just regular flex jumpers (Digi-Key, Mouser) with 0.5mm pitch, 30 contacts, t=0.3mm, same side contacts, gold plating (for testing you may use regular tin plating, I would not recommend to use them in the sewer environment. Andrey ---- On Thu, 15 Nov 2018 16:35:01 -0800 Richard Rigby <rrigby at redzone.com> wrote ---- Hi Andrey, Are these cables custom, or can we order them from another supplier? Kind regards, Richard Rigby Software Developer www.redzone.com  Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:26, Elphel Support <support-list at support.elphel.com> wrote: _______________________________________________ Support-list mailing list Support-list at support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Richard, We have many of only 70mm and 250mm, the other lengths shown here https://wiki.elphel.com/wiki/File:Elphel_cables.jpeg are in just sample quantities ~5, but we can reorder them if needed. Andrey ---- On Thu, 15 Nov 2018 15:17:09 -0800 Richard Rigby <rrigby at redzone.com> wrote ---- Hi Andrey, At least 100mm up to 130mm. The cable we have at the moment are 70mm. Kind regards, Richard Rigby Software Developer www.redzone.com  Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:15, Elphel Support <support-list at support.elphel.com> wrote: _______________________________________________ Support-list mailing list Support-list at support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Richard, What length of the cables do you need? Andrey ---- On Thu, 15 Nov 2018 15:10:32 -0800 Richard Rigby <rrigby at redzone.com> wrote ---- Hi Oleg, I would like to purchase some of the flex cables used to connect to the sensors. Could you please provide my with the specs/details required for purchasing? Thank you. Kind regards, Richard Rigby Software Developer www.redzone.com  Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand _______________________________________________ Support-list mailing list Support-list at support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20181115/21a4596d/attachment-0001.html>