[Elphel-support] Info needed 10338 rev. d/e J1 connector

[Andrey Filippov]

Frederick,

It is just that tin "E" he EEPROM chip is replaced with the EEPROM+temperature monitor (same as used on computer memory DIMMs), all the rest is the same.

Andrey

---- On Wed, 31 Jan 2018 12:10:55 -0800 Frederick Gamache<frederick.gamache at gmail.com> wrote ---- 

Hello Andrey,

I just want to know what are the differences between the rev. D and E for the 10338 board?
Are the schematics the same between the two revisions?


Regards,
Frederick




On Fri, Jan 12, 2018 at 12:00 PM, Andrey Filippov <andrey at elphel.com> wrote:
Frederick, yes, they are compatible. Even 10359 multiplexer works with 10393.

Andrey

---- On Fri, 12 Jan 2018 07:56:51 -0800 Frederick Gamache<frederick.gamache at gmail.com> wrote ---- 

Hello Andrey,

I just want to know if your 10338d/e board (with sensor MT9P031) is compatible with the 10393 board?
Is the 10338d/e board still available for purchase?


What I would like to do is use the 10393 board and the camera project to interface with my own sensor board which holds a MT9P031 sensor.
I would make a PCB to adapt my sensor board to the 10393. Also, I would like to use a 10338d/e as a reference for comparision and debug of my own interface.


Frederick




On Wed, Dec 6, 2017 at 8:28 AM, Frederick Gamache <frederick.gamache at gmail.com> wrote:
Thank you Andrey for your fast response.That was the info I just needed.


Best regards,
Frederick


On Mon, Dec 4, 2017 at 4:54 PM, Andrey Filippov <andrey at elphel.com> wrote:
Frederick,

On older rev D boards we used https://www.digikey.com/products/en?keywords=WM7987CT-ND - it has the same footprint and holds the cable better, but requires stronger force to latch, and we did not want to apply high force to the boards when adjusting sensor front ends before gluing. If needed these Molex connectors can still be used with 10338d/e.

Andrey

---- On Mon, 04 Dec 2017 13:32:11 -0800 <support-list at support.elphel.com> wrote ---- 

Frederick,

Parts list is missing for the board, we'll fix that. Connector is the same as J6-J9 of the 10393 board (https://wiki.elphel.com/images/1/11/10393b.pdf)

https://www.digikey.com/product-detail/en/hirose-electric-co-ltd/FH12-30S-0.5SV-55/HFL130CT-ND/1110414

Andrey

---- On Mon, 04 Dec 2017 13:23:48 -0800 Frederick Gamache <frederick.gamache at gmail.com> wrote ---- 

Hi,

I would like to know what is the exact part number (digikey, manufacturer) for connector J1 on the 10338 board rev. d/e.


I didn't find the parts list for rev. d/e on your webstite (only for rev. A).


Best regards,
Frederick

 _______________________________________________ 
Support-list mailing list 
Support-list at support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com 


















 




 












 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180131/0828bc63/attachment.html>