[Elphel-support] 353 Problem Mainboards

[Linden @ Zone4]

Thanks for the tip, solved it:
I recall the autocampars.php file was causing issues on this camera before
and I probably tried to fix it by pasting in the file from source into the
web based terminal (http://10.23.33.9/index.php?site=phpshell.php). This
converts all the HTML entities (&npsp; etc...) to the wrong thing. I SCPed
in the original source, deleted /etc/autocampars.xml and ran
/usr/html/autocampars.php --init. Working again.

I am still going to ship you the 000E64081CA1 mainboard (the one that won't
boot).

Thanks,

Linden Mills-Connery
Zone4 Team <https://zone4.ca/contact/>
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215

On 20 August 2018 at 10:43, Oleg <support-list at support.elphel.com> wrote:

> Linden,
>
> Does the file look ok? It should have ~4k lines.
> http://192.168.0.9/index.php?site=admin-bin/editcgi.cgi?
> file=/usr/html/autocampars.php
>
> Regards,
> Oleg
>
> On Fri, Aug 17, 2018 at 6:57 PM Linden @ Zone4 <linden at zone4.ca> wrote:
>
>> I have run '/usr/html/autocampars.php --init', looks like a very similar
>> error trace to loading http://10.23.33.9/index.php?site=autocampars.php.
>> Output posted at bottom of GDoc:
>> https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJL
>> odron0P0zYcpB4/edit?usp=sharing
>>
>> Linden Mills-Connery
>> Zone4 Team <https://zone4.ca/contact/>
>> 205-820 Main Street
>> <https://maps.google.com/?q=205-820+Main+Street+Canmore,+AB,+T1W2B7&entry=gmail&source=g>
>> Canmore, AB, T1W2B7
>> <https://maps.google.com/?q=205-820+Main+Street+Canmore,+AB,+T1W2B7&entry=gmail&source=g>
>> 403-401-7215
>>
>> On 17 August 2018 at 17:53, Oleg <support-list at support.elphel.com> wrote:
>>
>>> I deleted /etc/autocampars.xml and went to http://10.23.33.9/index.
>>>> php?site=autocampars.php again to re-generate it which just resulted
>>>> in an error message. The error message is also in the GDoc.
>>>>
>>> That worked with the board I'm testing.
>>>
>>> What if you reboot?
>>> Try from command line?
>>>
>>> [root at Elphel353 /root]759# */usr/html/autocampars.php --init*
>>>> autocampars.php created a new configuration file /etc/autocampars.xml
>>>> from defaults.
>>>> Current frame=1266, sleeping to give daemons a chance
>>>> Current frame=1319, waking up, daemons should be dead already
>>>> before reset - current frame=0
>>>> after reset - current frame=2
>>>> setting COMPRESSOR_RUN=2
>>>> setting DAEMON_EN=Array
>>>> (
>>>>    [DAEMON_EN_AUTOEXPOSURE] => 1
>>>>    [DAEMON_EN_STREAMER] => 1
>>>>    [DAEMON_EN_CCAMFTP] => 0
>>>>    [DAEMON_EN_CAMOGM] => 0
>>>>    [DAEMON_EN_TEMPERATURE] => 0
>>>>    [DAEMON_EN] => 3
>>>> )
>>>> after setParsFromPage - current frame=12
>>>> Sensor was successfully initialized at August 17, 2018, 11:49 pm from
>>>> /etc/autocampars.xml page 0
>>>
>>>
>>> Regards,
>>> Oleg
>>>
>>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_
>> support.elphel.com
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20180820/64d483cb/attachment.html>