[Elphel-support] Network address of camera

[andrey]

Denis,

You should have all the circuit diagrams  - each camera has them inside the file system. You may also get them from the camera source code on Sourceforge:
https://sourceforge.net/projects/elphel/files/elphel/6.2.30/elphel323_6.2.30.tar.bz2/download
Then un-archive the downloaded file and then internal archive, circuit diagrams should be here:

elphel_6.2.30/elphelcamera/packages/web/docs/

CCD is controlled by a sequencer in FPGA, but you do not need to change the FPGA code - the sequence itself is loaded by the software (you may find explanations on this mailing list)

Andrey






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20160301/2e0e2436/attachment-0002.html>