[Elphel-support] just black/white and slooooowly
Manuel Christen
mc at schaeffer-ag.de
Thu Jun 30 07:49:09 PDT 2016
Hi everybody,
I have three 353 Cameras with the Firmware 8.0.9.2, 8.2.16 and 8.0.7.4.
I have troubles with the one with the Firmware 8.0.9.2.
*** 1) Just Black/White. If I change with the Camera Control Interface
to Color nothing happens. Its shows just Black/White. At the other
cameras, I see at the color histogram just a white line. At all other
ones all colors (blue, yellow, red, white)
My Question is: is maybe the lighthttpd broken? Is there a config file
at the camera where i can modify the values over the command line?
*** 2) The Camera is very slowly. The Network Switch shows me a 100MB
Connection. But if I dowload a raw image, it feels 10 times slower than
at the other ones ...
*** 3) The Camera Control Interface is very slowly. At the first time I
changed the compression rate of the Image and it ignore is. After a
restart (power off/on) I was aible to change the values ... exept
black/white to color ...
Is the camera broken? Is there a better possibility to check the logs?
(I have just /var/log and dmesg) and everythings looks OK) ...
I need other opinions and better Ideas to find my problem. Any Idea? Any
comments?
regards,
Manuel
PS: The Enviroment: Two cameras are attached with the PoE Switch, exept
the troublemaker. She is connected with the PoE Injector directly to the
Network.
More information about the Support-list
mailing list