[Elphel-support] Camera Sensor Failing
Linden Mills-Connery
lmillsc at gmail.com
Wed Nov 11 14:13:09 PST 2015
Oleg,
I believe I tried the same thing previously but missed the 'sync' command.
This looks to have worked for camera_1 and it is back functioning normally.
Thanks.
camera_2 however is still not working after three attempts of removing
autocampars.xml.
Strange...
Linden Mills-Connery
Zone4 Team <http://new.zone4.ca/contact>
205-820 Main Street
Canmore, AB, T1W2B7
403-401-7215
On 11 November 2015 at 13:51, Oleg <support-list at support.elphel.com> wrote:
> Hi,
>
> I'll have a closer look at the files you sent. Meanwhile, both sensors are
> detected at least.
> Could you try deleting /etc/autocampars.xml - if missing it is recreated
> when camera boots:
> telnet session:
>
>> mv /etc/autocampars.xml /etc/autocampars.xml_bkp
>> sync
>> reboot -f
>
>
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20151111/e6b2bfa7/attachment-0002.html>
More information about the Support-list
mailing list