[Elphel-support] Fwd: Re: firmware update 8.0.9.2 to 8.2.16 failed

[Tom Sparks]

On 12/05/15 05:58, Tom Sparks wrote:
> On 12/05/15 04:48, Oleg wrote:
>> Hi Tom,
>>
>>     elphel ppa repo dose not include Ubuntu 14.04.2 trusty
>>     what are my options?
>>
>>
>> 1. Download a live usb <http://www3.elphel.com/liveusb>
>> (kubuntu-elphel-4.iso <http://community.elphel.com/files/live-dvd/>)
> 
> my main computer don't like booting of the live usb stick (64bit)
> and my only x86 (32bit) computer has a dead ethernet port and very
> questionable wifi
> 
> 
>  and
>> the firmware image
>> <http://sourceforge.net/projects/elphel/files/elphel353-8/8.2.16/> (which you
>> already did), boot from the usb drive and flash the camera. Let me know
>> if there are any problems.
>>
>> 2. Manual adding should work:
>>
>> Add the following lines to your sources.list (*sudo kate /etc/apt/sources.list*)):
>> deb http://ppa.launchpad.net/elphel/ppa/ubuntu natty main 
>> deb-src http://ppa.launchpad.net/elphel/ppa/ubuntu natty main 
>>
>> sudo apt-get update
>> sudo apt-get install cris-dist
>>
>> Try building the firmware after.
>>
> 
> ok, retrying the elphel live usb again via virtualbox
> because starting with a virgin copy of ubuntu ubuntu-12.04.5 was no fun
> 
>> Best regards,
>> Oleg Dzhimiev
>> Electronics Engineer
>> phone: +1 801 783 5555 x124
>> Elphel, Inc.
> 
> 
update: I build the firmware with the elphel liveCD  :)
followed
http://wiki.elphel.com/index.php?title=Netboot_firmware_upgrade
failed at step 2 camera well not go into netboot mode

leds: orange sold green flashing
tried five times :(
-- 
tom sparks
x86? We ain't got no x86. We don't need no stinking x86!