[Elphel-support] Question about board versions and software versions...

[TODD KUENY]

I have two types of Elphel boards:  One with MICRON NAND and one ST NAND (images below).  Both are marked “Revision E."

Is it true that Version 8.0+ is required for the MICRON NAND?

Will 8.0 also run on older boards?

Is it true that Version 7.X will run on Micron NAND only with kernel mods?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Elphel-ST.psd
Type: image/psd
Size: 5842780 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20150818/99543111/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Elphel-Micron.jpg
Type: image/jpg
Size: 1315984 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20150818/99543111/attachment.jpg>