[Elphel-support] Back to life 313 camera

[Oleg]

Hello Artem,

I'll check if we have any working 313 around.
>From a telnet session:
1. What's the output of "dmesg"?
2. Output of "fpcf -i2cr16 4800 100"? - this command reads the sensor's
registers through i2c. Will work if 5MPix sensor is installed.
3. ANd "fpcf -X 1"? - reports the clock frequency set for the sensor.

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20141208/ce74d691/attachment-0002.html>