[Elphel-support] Backup/Restore Camera Configuration
Oleg
support-list at support.elphel.com
Mon Nov 25 11:10:10 PST 2013
Hi,
http://<camera-ip> -> "Parameter Editor"
Scroll down to the 2nd table.
- "Save" button
- Optionally write some comment and press "Update" to the right of it.
Next time the camera will boot with these settings.
- To set the parameter group used at boot time, select it and press
"Update Default" button.
Camera's ip address is saved through http://<camera-ip> -> "System
Preferences", but you already know this.
On 25 November 2013 05:59, Manuel Christen <mc at schaeffer-ag.de> wrote:
>
> is there a possibility with the webinterface to backup/restore
> the camera configuration?
>
> best regards
> Manuel
>
>
> --
> Manuel Christen Schaeffer AG
> Nahmitzer Damm 32 Tel. +49-30-8058695-53
> 12277 Berlin Fax: +49-30-8058695-33
> http://www.schaeffer-ag.de
>
> HRB 93611 B, Amtsgericht Berlin Charlottenburg
> Vorstand: Jörg Schaeffer, Kai Schaeffer
> Aufsichtsrat: Dieter Kersten (Vorsitzender)
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
> --
> Best regards,
> Oleg Dzhimiev
> Electronics Engineer
> phone: +1 801 783 5555 x124
> Elphel, Inc.
> <http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20131125/178e42ad/attachment-0002.html>
More information about the Support-list
mailing list