[Elphel-support] Fwd: NC353L net boot procedure

[Khashayar Azad]

Hi Andrey, any update on this? Can you help?

Be Tireless

K

T: +61 2 8003 4787
F: +61 2 8103 2029
M: +61 400 419 626



On Sat, Sep 1, 2012 at 7:11 AM, Khashayar Azad <khashayar at azad.cc> wrote:

> Hi Andrey and thanks for the info. Do I just build the 333 based firmware
> using the newer SDK and then flash it using net boot on the 353 or do I
> need to do source modifications in order to be able to compile the code on
> the 353?
>
> In the process you pointed to I assume that I just replace the section
> pointing to the Elphel source with my own, is this correct?
>
> Please advise.
>
> K
> On Aug 25, 2012 9:44 AM, "Andrey Filippov" <
> support-list at support.elphel.com> wrote:
>
>> Hello Khashayar,
>>
>> NC353 camera has a different processor than earlier model 333 (ETRAX FS
>> vs. ETRAX 100LS), so the firmware has to be built with the newer SDK (see
>> http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu ).
>>
>> Andrey
>>
>> On Fri, Aug 24, 2012 at 4:16 PM, Khashayar Azad <khashayar at azad.cc>wrote:
>>
>>> Is there a hard reset button on the nc353l unit, like the button on the
>>> 333 model?
>>>
>>> Also what's the procedure of doing a network boot on the device? I'm
>>> trying to flash a custom firmware using flashitall command. My firmware was
>>> built on the 333 model, will I be able to use the same firmware or not due
>>> to the considerable difference in versions?
>>>
>>>
>>> Please advise.
>>>
>>> K
>>>
>>>
>>> _______________________________________________
>>> Support-list mailing list
>>> Support-list at support.elphel.com
>>>
>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120905/ae2cc9f0/attachment-0002.html>