[Elphel-support] DC auto-iris

[Shane Sanford]

I have a outdoor application were we think we need a auto-iris lens with our
Elphel camera.  Is there a existing relatively inexpensive solution for
controlling the lens using the Elphel camera?  After doing some looking
around I have not found anything that fits the bill but before I go and try
to reinvent the wheel I thought I would ask to make sure there was not a
obvious solution I was overlooking.  

 

My current plan is to build a circuit interfaced to a arduino and connect to
the camera in the case of the NC353L-369 camera or if we end up going
without the 10369 board then use a netduino (or arduino with a network
shield) and communicate via the network.

 

Input would be appreciated!

 

Shane

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20121013/f6cb0203/attachment-0002.html>