[Elphel-support] From Argentina

[Oleg]

Marco,

Ephel camera buy nc353 L
> once logged on via the ip, but then stopped working and fails to connect


1. Was it the first time you logged in (telnet?) to the camera? What
commands did you try?
2. You tried powering it off and on, right?
3. When you power on the camera how do the LEDs on its back behave? Yellow
should be solid on, green - blinking.
4. What's your LAN subnet? 192.168.0.xxx? What's the LAN structure?
5. What's you OS? From the command line try "ping -b 192.168.0.255" -
what's the output?

Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 5555 x124
Elphel, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120520/d7552838/attachment-0002.html>