[Elphel-support] external hdd
Carlos Padial
palidoestudio2 at gmail.com
Tue Mar 20 10:47:16 PDT 2012
yes, this seems to be said in fdisk
| /dev/hda1 1 60802 488386583+ ee EFI GPT
but i dont know about this. What kind of partition is expected to work?
some guidance will be helpful.
best regards.
2012/3/20 Alexandre Poltorak <polto at alsenet.com>
> Hi Carlos,
>
> It may be that you have partitioned it as GPT partitions.
>
> Best regards,
> Alexander
> ------------------------------
>
> *De: *"Carlos Padial" <palidoestudio2 at gmail.com>
> *À: *"Oleg" <support-list at support.elphel.com>
> *Envoyé: *Mardi 20 Mars 2012 15:40:39
> *Objet: *[Elphel-support] external hdd
>
>
> hi oleg
>
> now i have removed again the internal hdd and want to try the external
> sata.
>
> i have an external hdd with two partitions:
> dev/sdc1 344gb ext4
> dev/sdc2 121gb ext2
>
> i want to use the second one, i formatted it not to big (120gb, as the
> internal). I formatted the ext2 in my computer, not in camera...
>
> i get this in the boot log:
> ----------------------------
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
>
> ide: ETRAX FS built-in ATA DMA controller
>
> cris_ide_init()
>
> hda: ST3500630AS, ATA DISK drive
>
> ide0 at 0x10000000-0x10000007,0x2c000000 on irq 65
>
> hda: max request size: 128KiB
>
> hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63,
> (U)DMA
>
> hda: cache flushes supported
>
> hda: hda1
>
> Initializing USB Mass Storage driver...
> ------------------------------
>
> and in the camera from telnet:
>
> [root at Elphel353 /]829# fdisk -l
>
> Disk /dev/hda: 500.1 GB, 500107862016 bytes
> 255 heads, 63 sectors/track, 60801 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Device Boot Start End 1K-Blocks Id System
> /dev/hda1 1 60802 488386583+ ee EFI GPT
> [root at Elphel353 /]829# cat /proc/partitions
> major minor #blocks name
>
> 3 0 488386584 hda
> 3 1 488386583 hda1
> 31 0 131072 mtdblock0
> 31 1 256 mtdblock1
> 31 2 7936 mtdblock2
> 31 3 24576 mtdblock3
> 31 4 81920 mtdblock4
> 31 5 12288 mtdblock5
>
> ------------------------------
> in camogmgui i see the partition detected but cant mount it.
>
> dont know if it is detecting the right partition. It's right to use an hdd
> with more than one partition?
>
> thanks again.
>
> --
> Carlos Padial
> surreal.asturnazari.es
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
--
Carlos Padial
surreal.asturnazari.es
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120320/cde29f99/attachment-0002.html>
More information about the Support-list
mailing list