[Elphel-support] external hdd
Carlos Padial
palidoestudio2 at gmail.com
Tue Mar 20 07:40:39 PDT 2012
hi oleg
now i have removed again the internal hdd and want to try the external sata.
i have an external hdd with two partitions:
dev/sdc1 344gb ext4
dev/sdc2 121gb ext2
i want to use the second one, i formatted it not to big (120gb, as the
internal). I formatted the ext2 in my computer, not in camera...
i get this in the boot log:
----------------------------
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide: ETRAX FS built-in ATA DMA controller
cris_ide_init()
hda: ST3500630AS, ATA DISK drive
ide0 at 0x10000000-0x10000007,0x2c000000 on irq 65
hda: max request size: 128KiB
hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63,
(U)DMA
hda: cache flushes supported
hda: hda1
Initializing USB Mass Storage driver...
------------------------------
and in the camera from telnet:
[root at Elphel353 /]829# fdisk -l
Disk /dev/hda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End 1K-Blocks Id System
/dev/hda1 1 60802 488386583+ ee EFI GPT
[root at Elphel353 /]829# cat /proc/partitions
major minor #blocks name
3 0 488386584 hda
3 1 488386583 hda1
31 0 131072 mtdblock0
31 1 256 mtdblock1
31 2 7936 mtdblock2
31 3 24576 mtdblock3
31 4 81920 mtdblock4
31 5 12288 mtdblock5
------------------------------
in camogmgui i see the partition detected but cant mount it.
dont know if it is detecting the right partition. It's right to use an hdd
with more than one partition?
thanks again.
--
Carlos Padial
surreal.asturnazari.es
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120320/771290c5/attachment-0002.html>
More information about the Support-list
mailing list