[Elphel-support] Fwd: NC353L net boot procedure

[Khashayar Azad]

Hi Andrey and thanks for the info. Do I just build the 333 based firmware
using the newer SDK and then flash it using net boot on the 353 or do I
need to do source modifications in order to be able to compile the code on
the 353?

In the process you pointed to I assume that I just replace the section
pointing to the Elphel source with my own, is this correct?

Please advise.

K
On Aug 25, 2012 9:44 AM, "Andrey Filippov" <support-list at support.elphel.com>
wrote:

> Hello Khashayar,
>
> NC353 camera has a different processor than earlier model 333 (ETRAX FS
> vs. ETRAX 100LS), so the firmware has to be built with the newer SDK (see
> http://wiki.elphel.com/index.php?title=Elphel_Software_Kit_for_Ubuntu ).
>
> Andrey
>
> On Fri, Aug 24, 2012 at 4:16 PM, Khashayar Azad <khashayar at azad.cc> wrote:
>
>> Is there a hard reset button on the nc353l unit, like the button on the
>> 333 model?
>>
>> Also what's the procedure of doing a network boot on the device? I'm
>> trying to flash a custom firmware using flashitall command. My firmware was
>> built on the 333 model, will I be able to use the same firmware or not due
>> to the considerable difference in versions?
>>
>>
>> Please advise.
>>
>> K
>>
>>
>> _______________________________________________
>> Support-list mailing list
>> Support-list at support.elphel.com
>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20120901/6aa5d8c5/attachment-0002.html>