[Elphel-support] Can't communicate with Elphel353

[Andrey Filippov]

Diana,

So were you able to communicate via serial port? How did you do that? What
was it exactly there? What happens on the serial port now?

Andrey


On Fri, Sep 2, 2011 at 8:23 AM, Diana Carrigan
<DianaEJohnson at maxim-ic.com>wrote:

> Hi Andrey,****
>
> ** **
>
> I don’t think I configured anything. I just wanted to see if I could hook
> up thru the serial cable at the baud rate 115K and I could. Later in the
> day, I could no longer communicate via the Ethernet, so I power cycled.
> Since then nothing has worked.****
>
> ** **
>
> A couple of days ago, when I powered up the camera, it took three power
> cycles before the Ethernet communication started working.****
>
> ** **
>
> So I’m not sure what happened. Possibly a hardware issue?****
>
> ** **
>
> Diana****
>
> *From:* elphel at gmail.com [mailto:elphel at gmail.com] *On Behalf Of *Andrey
> Filippov
> *Sent:* Friday, September 02, 2011 8:17 AM
> *To:* Diana Carrigan; support-list at support.elphel.com
> *Subject:* Re: [Elphel-support] Can't communicate with Elphel353****
>
> ** **
>
> ** **
>
> On Fri, Sep 2, 2011 at 7:59 AM, Diana Carrigan <DianaEJohnson at maxim-ic.com>
> wrote:****
>
> We have not changed any code in the camera. I power cycled the camera and
> now we can not communicate to it thru Ethernet or the Serial cable connected
> to the 10369 IO board.****
>
>
> Diana, you wrote that the serial cable was connected to the camera. Before
> you lost communication with the camera - did you configure some terminal
> emulator (i.e. minicom) to see camera boot messages on the system console?
>
> If yes - what happens now on that port?
>
> The baud rate on the port is 115k.
>
> Andrey
>  ****
>
> Prior to power cycling the camera we could communicate and run video and
> camera applications. The Ethernet green and yellow lights are blinking, and
> the light on the power supply is green.****
>
>  ****
>
> Any suggestions?****
>
>  ****
>
> Diana Carrigan****
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
> ****
>
> ** **
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110902/9b83e41e/attachment-0002.html>