[Elphel-support] Questions about the sensor in Elphel353

[Diana Carrigan]

Hello,

Do all of the JP4 modes listed in the below article (under Different JP4 Modes in 8.x Software) bypass the Demosaic in the FPGA. If not, which do and which don’t.

Best Regards,

Diana Carrigan

From: Alexandre Poltorak [mailto:polto at alsenet.com]
Sent: Tuesday, September 06, 2011 12:55 PM
To: Diana Carrigan
Subject: Re: [Elphel-support] Questions about the sensor in Elphel353

Hi,

Please take a look here : http://wiki.elphel.com/index.php?title=JP4

JP4 is Elphel's RAW format. Disk Recorder can record even long videos in JP4.

Conversion must be done on a computer in post-processing.

Best regards,
Alexandre
________________________________
De: "Diana Carrigan" <DianaEJohnson at maxim-ic.com>
À: support-list at support.elphel.com
Envoyé: Mardi 6 Septembre 2011 20:49:13
Objet: [Elphel-support] Questions about the sensor in Elphel353


Hello,

We have a couple of questions I’m sure you guys can answer.


1)      What is the sensor data format defaulted to? (RGB? YUV?)

2)      Does the sensor do an RGB to YUV conversion?

3)      Can the Disk Recorder (or some other program) be used to create a data file of the video stream of the RAW RGB data (perhaps 5 seconds worth of video stream)?
Thanks for your help..

Diana Carrigan

_______________________________________________
Support-list mailing list
Support-list at support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20111026/461bf5c2/attachment-0002.html>