[Elphel-support] Camera Issues

[Diana Carrigan]

What would you expect to see if the sensor cable was not connected at all?

Thanks,
DIana

From: elphel at gmail.com [mailto:elphel at gmail.com] On Behalf Of Andrey Filippov
Sent: Tuesday, October 11, 2011 5:19 PM
To: Diana Carrigan; support-list at support.elphel.com
Cc: Robert Kuzmak
Subject: Re: [Elphel-support] Camera Issues

Diana,

Do you have 10369 board that you can watch camera boot messages on some terminal emulator over the serial port? With that you would notice that immediately - failure to dtect sensor and autocampars.php getting stuck.

Andrey
On Tue, Oct 11, 2011 at 5:12 PM, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
Excellent! I had a loose cable to the sensor.

Diana

From: elphel at gmail.com<mailto:elphel at gmail.com> [mailto:elphel at gmail.com<mailto:elphel at gmail.com>] On Behalf Of Andrey Filippov
Sent: Tuesday, October 11, 2011 5:01 PM
To: Diana Carrigan; support-list at support.elphel.com<mailto:support-list at support.elphel.com>
Cc: Alexandre Poltorak; Robert Kuzmak

Subject: Re: [Elphel-support] Camera Issues

Diana,

if you update the software from the CVS, it has the bug fixed. The bug preventing booting camera if no sensor was detected - autocampars.php was expecting that /var/state/stype will have
ctype="NONE"
when there is no sensor, and was getting just
ctype=NONE

That will allow lighttpd to start, but the sensor will not work anyway.  Did you modify any firmware or FPGA coe that might prevent sesnor detection/operation?

Andrey
On Tue, Oct 11, 2011 at 4:53 PM, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
[root at Elphel353 /root]761# ps
  PID USER       VSZ STAT COMMAND
    1 root      1136 S    init
    2 root         0 SWN  [ksoftirqd/0]
    3 root         0 SW   [watchdog/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    6 root         0 SW<  [kthread]
    8 root         0 SW<  [kblockd/0]
   11 root         0 SW<  [khubd]
   23 root         0 SW   [pdflush]
   24 root         0 SW   [pdflush]
   25 root         0 SW<  [kswapd0]
   26 root         0 SW<  [aio/0]
  568 root         0 SW   [mtdblockd]
  602 root         0 SWN  [jffs2_gcd_mtd4]
  648 root      1352 S    /bin/sh
  649 root      1328 S    /bin/sh /etc/init.d/rc 3
  652 root      1136 S    /sbin/respawnd
  655 root      1312 S    /usr/sbin/syslogd -m 0 -o 40000
  658 root      1144 S    /usr/sbin/klogd -x
  713 root      1136 R    /bin/utelnetd -d
  717 root      1376 S    /bin/vftpd -r
  728 root      1480 S    /usr/sbin/dropbear
  747 root      1136 S    /usr/local/sbin/imgsrv -p 8081
  749 root      1336 S    /bin/sh /etc/rc3.d/S90sync.sh start
  751 root      1120 S    /usr/local/sbin/autocampars
  752 root      4136 S    /usr/local/sbin/autoexposure
  753 root      1120 S    /usr/local/sbin/launch_php_script 2 /usr/local/sbin/c
  754 root     31344 S    /usr/local/sbin/php -q /usr/html/autocampars.php --in
  761 root      1352 R    -sh
  769 root      1488 R    ps
[root at Elphel353 /root]761#


I removed all "history" from my FireFox browser. I'm now back to my original problem, where it just says it can't establish a connection to the server ..

Thanks,

Diana

From: Alexandre Poltorak [mailto:polto at alsenet.com<mailto:polto at alsenet.com>]
Sent: Tuesday, October 11, 2011 4:47 PM

To: Diana Carrigan
Cc: Robert Kuzmak; elphel support-list
Subject: Re: [Elphel-support] Camera Issues

Diana,

Could you please connect over telnet and send the output of "ps" command here.

Thanks,
Alexandre
________________________________
De: "Alexandre Poltorak" <polto at alsenet.com<mailto:polto at alsenet.com>>
À: "Diana Carrigan" <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>>
Cc: "Robert Kuzmak" <Robert.Kuzmak at maxim-ic.com<mailto:Robert.Kuzmak at maxim-ic.com>>, "elphel support-list" <support-list at support.elphel.com<mailto:support-list at support.elphel.com>>
Envoyé: Mercredi 12 Octobre 2011 00:31:31
Objet: Re: [Elphel-support] Camera Issues
Diana,

It may be some proxy settings in your browser.

Regards,
Alexandre

_______________________________________________
Support-list mailing list
Support-list at support.elphel.com<mailto:Support-list at support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com


_______________________________________________
Support-list mailing list
Support-list at support.elphel.com<mailto:Support-list at support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com


_______________________________________________
Support-list mailing list
Support-list at support.elphel.com<mailto:Support-list at support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20111012/51078c41/attachment-0002.html>