[Elphel-support] 10359: black image after changes in sourcecode
Elphel Support List
list-ticket at elphel.com
Mon Feb 7 10:21:36 PST 2011
Hi Jens,
For a test, I'd try:
a. there could be a phase shift on the data bus signals due to different fpga routing.
http://192.168.0.9/parsedit.php?embed=0.15&title=Phase+Adjustment&DAEMON_EN&SENSOR_PHASE&MULTI_PHASE1&MULTI_PHASE2&MULTI_PHASE3&QUALITY&TESTSENSOR&FPGATEST&FRAME_SIZE
a1. Set TESTSENSOR to 0x1 - vertical color bars: http://wiki.elphel.com/index.php?title=File:Reference_img.jpeg
a2. Try to change MULTI_PHASE1 & SENSOR_PHASE
b. 'connect'
> spx_vact1
> spx_hact1
> spxd1
- these are the incoming signals from the sensor in J2. They are sync to sclk0
and connecting them to the output signals (sync to sclk0 as well) that go to the system board:
> ivact
> ihact
> pxdr
c. Try to output a counter from your module.
Regards,
Oleg
More information about the Support-list
mailing list