[Elphel-support] rtsp server

Sebastian Pichelhofer sebastian.pichelhofer at gmail.com
Sun Feb 6 23:51:45 PST 2011


Another idea:

Did you try reducing camera resolution before starting mplayer, VLC etc. in
camvc or through parsedit?

Most players cannot handle resolutions higher than 2048 in width or height.

Regards Sebastian

On Mon, Feb 7, 2011 at 01:12, Adam Gobi <adam.gobi at acheron.com.au> wrote:

> Andrey,
>
> The camera is in its default state.  I connected it to my macbook pro, and
> the RTSP server appears to work fine there.  The problems I have been having
> are in some way related to Windows 7 I guess, which is my work computer
> (toshiba R700 notebook).  The network is a direct connection, with the R700
> IP set to 192.168.0.1.  I can't get the streaming to work on Windows 7 (VLC,
> Mplayer), nor KUbuntu through VirtualBox (again VLC, MPlayer), though the
> camera appears to work fine through its web server on both OSes.  I tried
> turning off any Windows firewalls, and it hasn't helped.  This problem is
> strange to me, considering that I can get it working fine on my Mac with
> VLC.  Any other ideas?
>
> Adam
>
>
> On 4 February 2011 16:00, Andrey Filippov <andrey at elphel.com> wrote:
>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Thu, Feb 3, 2011 at 9:04 PM, Adam Gobi <adam.gobi at acheron.com.au>wrote:
>>
>>> Hi Andrey, it is just the basic camera, no 10359 board.  I tried both of
>>> your suggestions with no luck, still getting this output:
>>>
>>> Starting playback...
>>> V:   0.0   0/  0 ??% ??% ??,?% 0 0
>>>
>>> Exiting... (End of file)
>>>
>>
>> Adam,
>>
>> Is the software, configuration files in default state?
>> Is the camera connected directly or through some switches?
>> What is you network?
>> Did you try different computer(s)/network cards?
>>
>> Andrey
>>
>>
>>
>
>
> --
> Adam Gobi
> Electrical Engineer - Imaging
> Acheron Project Pty Ltd
> Leichhardt, NSW, Australia
> e: adam.gobi at acheron.com.au
> v: +61 451 951 323
> f: +61 2 9571 5575
>
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110207/04e56f35/attachment-0002.html>


More information about the Support-list mailing list