[Elphel-support] Issue with PPA

Fri Aug 19 12:37:44 PDT 2011

Hi Oleg,

Yes, the directory "elphel353-8.1.0.5" is created, and "install_elphel" is inside. When I run the install_elphel script is when I see the error. I've attached the build.log

Thanks,

Diana

From: andersonnotgood at gmail.com [mailto:andersonnotgood at gmail.com] On Behalf Of Oleg
Sent: Friday, August 19, 2011 1:19 PM
To: Diana Carrigan
Cc: elphel support-list
Subject: [Elphel-support] Issue with PPA

Hi Diana,

No, for password just hit "Enter" (it's empty for anonymous user download from SourceForge). After that you should have a "elphel353-8.1.0.5" folder on the same level with "install_elphel" inside, right?

regards,
Oleg
On 19 August 2011 12:53, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
I tried to re-install , but I'm seeing the same error. When I run the elphel353_80_install_from_cvs.sh script

It's asking for a CVS password after it logs into :pserver:anonymous at elphel.cvs.sourceforge.net:2401/cvsroot/elphel<http://pserver:anonymous@elphel.cvs.sourceforge.net:2401/cvsroot/elphel>

Is there a specific password I need?

When I put in my normal root password, it says

cvs login: authorization failed: server elphel.cvs.sourceforge.net<http://elphel.cvs.sourceforge.net> rejected access to /cvsroot/elphel for user anonymous

Could this be causing me problems?

Diana

From: andersonnotgood at gmail.com<mailto:andersonnotgood at gmail.com> [mailto:andersonnotgood at gmail.com<mailto:andersonnotgood at gmail.com>] On Behalf Of Oleg K Dzhimiev
Sent: Wednesday, August 17, 2011 4:58 PM
To: Diana Carrigan
Cc: elphel support-list

Subject: Re: [Elphel-support] Issue with PPA

Could you try to reinstall cris-dist (if the failed manual installation was the last one then it might have cleaned everything without installing):

in the command line:
sudo apt-get purge cris-dist
sudo apt-get install cris-dist

If you feel more comfortable with a graphical user interface this can be done in the KPackageKit - launch it and find cris-dist.

Oleg
On 17 August 2011 16:34, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
Hi Oleg,

I did as you suggested; however, when running the install_elphel  application, I got the following errors. This stuff is all new to me..so I really appreciate your help! Diana

Verifying Axis Development Board R2_10 Arcive (devboard-R2_10.tar.gz in /home/dcarrigan/Downloads/distfiles) OK

---processing /home/dcarrigan/Downloads/distfiles/devboard-R2_10.tar.gz
---creating link to downloaded (or to be downloaded) files
---copying Elphel files needed before ./configure
Running Axis configure

`../elphel_preconfigure/configure-files/source-R1_12_0/functions' -> `./configure-files/source-R1_12_0/functions'
* Unpacking "distfiles/tools-build-R2_19_3.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_common-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_general-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_hardware-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_libraries-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_network_application-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_network_protocol-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-devboard-AC_web-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/configure-files-common-AC_common-tag--devboard-R2_10-1.tar.gz"... done
* Select which product configuration to use.
*   1. elphel353  -  "Elphel (R) Model 353 Camera"
* Specify product [1-1] (default: 1):
* Selected product is "elphel353" To select another product run: "DEV_BOARD_PRODUCT=<product name> ./configure"

* The SDK installation will soon start download and install the source packages required for the default configuration. If you would like to use a different configuration you can configure the SDK, hence avoid downloading and installing of unnecessary packages.
* Would you like to configure the SDK now [y/n] (default: n)?
 * Unpacking "distfiles/configure-files-common-common-tag--devboard-R2_10-1.tar.gz"... done
* Unpacking "distfiles/modules-rules.build_modules-R1_1_1.tar.gz"... done
* Unpacking "distfiles/tools-iopasm-IR1_4-2.tar.gz"... done
* Unpacking "distfiles/modules-Rules.iop-R1_1_0.tar.gz"... done
* Error in function called from file: configure-files/common/common <= ./configure:
        compiler: Cannot not find compiler "crisv32-axis-linux-gnu-gcc"!
        Try modifying your PATH.

From: Oleg [mailto:andersonnotgood at gmail.com<mailto:andersonnotgood at gmail.com>]
Sent: Wednesday, August 17, 2011 3:28 PM
To: Diana Carrigan
Cc: Andrey Filippov
Subject: Re: [Elphel-support] Issue with PPA

Diana,

I changed wiki instructions them too less confusing.

The thing is after you do
sudo apt-get install cris-dist
the cris cross-compiler will be installed and you can proceed to "Build Elphel Software".

Best regards,
Oleg
On 17 August 2011 14:53, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
Hi, Andrey,

Yes we are trying to develop software and compile our programs to run in the camera. I'm following the instructions in the document titled Elphel Software Kit for Ubuntu, found on the Wiki.

My next big tackle seems to be compiling gcc-cris.

I have sent the install-cris-tools_log to compiler-contact at axis.com<mailto:compiler-contact at axis.com>, but they have not responded. I seeing the following message:

**********buffer overflow detected**********: cris-axis-elf-ar terminiated

And then the program aborts with an Error 2.

If any of your experts have any ideas, please let know! I've attached the log.

Thanks again ,

Diana

From: elphel at gmail.com<mailto:elphel at gmail.com> [mailto:elphel at gmail.com<mailto:elphel at gmail.com>] On Behalf Of Andrey Filippov
Sent: Wednesday, August 17, 2011 1:54 PM
To: Diana Carrigan
Cc: internal

Subject: Re: Issue with PPA

Diana,

I'll ask our team members who dealt with launchpad to investigate this issue. Meanwhile - maybe I can help you to achieve your goal differently? (as I wrote earlier - launchpad is new for us,  and I personally do not have much experience with it, used Sourceforge)  What are you trying to do -  install development software to compile you programs to run in the camera? Or something different?

Also - can you direct your technical questions to our mailing list? There are more people who can help there. You do not have to subscribe to the list, the first message will be delayed in the moderation queue until some of us add your email to the "white list", after that your messages will go through immediately.

The list info page - http://www3.elphel.com/list
Archive of the previous messages - http://www.mail-archive.com/support-list@support.elphel.com/
You may email to support-list at support.elphel.com<mailto:support-list at support.elphel.com> (first message will be held in moderation queue)

Andrey
On Wed, Aug 17, 2011 at 1:16 PM, Diana Carrigan <DianaEJohnson at maxim-ic.com<mailto:DianaEJohnson at maxim-ic.com>> wrote:
Hi Andrey,

I'm still seeing this issue. I think the issue is that the command  is adding  -name after ppa.

W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-name/ubuntu/dists/natty/main/source/Sources  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-name/ubuntu/dists/natty/main/binary-i386/Packages  404  Not Found

Thanks,

Diana
From: elphel at gmail.com<mailto:elphel at gmail.com> [mailto:elphel at gmail.com<mailto:elphel at gmail.com>] On Behalf Of Andrey Filippov
Sent: Tuesday, August 16, 2011 3:23 PM
To: Diana Carrigan
Cc: Elphel
Subject: Re: Issue with PPA

Hello Diana,

Can you try again, please? We also had problems with the Launchpad about an hour ago. If the error persists - we'll try to fix it. We just recently started to distribute software through the Launchpad, used only Sourceforge before.

Andrey
On Tue, Aug 16, 2011 at 3:08 PM, Diana Carrigan <diana.carrigan at maxim-ic.com<mailto:diana.carrigan at maxim-ic.com>> wrote:
I'm following the instructions for

adding ppa:elphel/ppa to your system's Software Sources using the
command:

sudo add-apt-repository ppa:elphel/ppa

The result being:

Executing: gpg --ignore-time-conflict --no-options --no-default-keyring
--secret-keyring /etc/apt/secring.gpg --trustdb-name
/etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring
/etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/<http://keyserver.ubuntu.com:80/> --recv
4236C2558A35918FCFD1DB956050780EC7A72F76
gpg: requesting key C7A72F76 from hkp server keyserver.ubuntu.com<http://keyserver.ubuntu.com>
gpg: key C7A72F76: "Launchpad PPA for elphel" not changed
gpg: Total number processed: 1
gpg:              unchanged: 1

This appears to work properly; however when I try to update

sudo apt-get update

I get the following error:

W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-
name/ubuntu/dists/natty/main/source/Sources  404  Not Found

W: Failed to fetch http://ppa.launchpad.net/elphel/ppa-
name/ubuntu/dists/natty/main/binary-i386/Packages  404  Not Found

Your help would be appreciated.

Diana
--
This message was sent from Launchpad by
Diana Carrigan (https://launchpad.net/~diana-carrigan<https://launchpad.net/%7Ediana-carrigan>)
using the "Contact this team's owner" link on the elphel team page
(https://launchpad.net/~elphel<https://launchpad.net/%7Eelphel>).
For more information see
https://help.launchpad.net/YourAccount/ContactingPeople

_______________________________________________
Support-list mailing list
Support-list at support.elphel.com<mailto:Support-list at support.elphel.com>
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110819/3b3b9d11/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build.log
Type: application/octet-stream
Size: 6639 bytes
Desc: build.log
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20110819/3b3b9d11/attachment.obj>