[Elphel-support] issues with firmware upgrade web interface

[Ákos Maróy]

Hi,

I'm having some issues with the firmware upgrade web interface of my
camera, which currently has firmware 8.0.8.48

when I go to the firmware upgrade web interface, and enter the NFS share
IP & directory there (in my case,
192.168.3.20:/tmp/image/image353-8.0.9/ ), and press the 'Check NFS'
button, I get:


NFS connection validated

Files:
 kimage not found!
 list not found!
 MD5SUM not found!
 nfs_flashitall not found!
 nfs_update not found!
 part0.img not found!
 part1.img not found!
 part2.img not found!
 part3.img not found!
 partitions. not found!


this is despite the fact that the files are there. checking manually
from the camera:

# mount
rootfs on / type rootfs (rw)
/dev/root on / type jffs2 (ro)
/dev/part/rwfsblock on /mnt/flash type jffs2 (rw)
proc on /proc type proc (rw)
tmpfs on /var type tmpfs (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw)
none on /proc/bus/usb type usbfs (rw)
192.168.3.20:/tmp/image/image353-8.0.9/ on /var/tmp/nfs_test type nfs
(rw,vers=3,rsize=1048576,wsize=1048576,hard,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.3.20)
# ls /var/tmp/nfs_test/ | more
MD5SUM
kimage
list
nfs_flashitall
nfs_update
part0.img
part1.img
part2.img
part3.img
partitions.conf



what is the easy way of flashing the camera, without the HTML UI magic,
but from command line?


Akos