[Elphel-support] camera triggering

[Alexandre Poltorak]

Andrey,

> I also noticed that while the camera is not triggering (during the boot
>  sequence) the LED attached to J15 connector of the master camera is always
>  on. As soon as the sensor is configured the led start to blink from
> trigger.
>
> That is wrong, it should be off. Will need to check - why is it so. Is
> it on all cameras?
>

I will test tomorrow. But I only connected PIN 1 and 4 to the LED, I did not
connected 1 to 3 and 2 to 4. May it be the reason ?

Alexandre
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100701/699ae51a/attachment-0002.html>