[Elphel-support] Panorama camera

[Andreas Bean]

Hello Bjorn,

I'm interested in a 4 sensor setup too. Currently we work with a
panorama setup
consisting of two sensors.

Unfortunately I'm out of office from 16.8 - 21.8. When I'm back we can
discuss
what we have done and if we can work together to be faster :)

Andreas Bean
BEANBOX

Björn Morén schrieb:
> Im trying to understand how to put together a miniature 360 panorama
> camera using 4 image sensors, 4 miniature fisheye lenses and your OEM
> components. I want to capture still images from the four cameras as
> JPEG, and save them to an attached harddrive. This capture is
> controlled by a remote switch.
>
> Reading your brochure it seems that I need:
> 1 x 10353 system board, to connect one sensor
> 4 x 10338 sensor front end
> 1 x 10359 multi sensor board to connect three more sensors
> 1 x IO board to connect the SATA HDD and the cable that triggers a
> capture. I also like to connect a GPS using USB.
>
> Is this correct?
>
> What amount of programming will be required to make this work? Do I
> have write all the system board code myself, or do I just have to
> configure the board through the web interface?
>
> I have no experience with Linux. Does the system support Windows?
>
> What maximum capture rate can I expect at full 5 MP resolution? 15 fps?
>
> Regards
> Bjorn
>
> (BTW, I tried to register for the mailing list, but got a page not
> found message)
>
> _______________________________________________
> Support-list mailing list
> Support-list at support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>   

-------------- next part --------------
A non-text attachment was scrubbed...
Name: office.vcf
Type: text/x-vcard
Size: 230 bytes
Desc: not available
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100815/7e7c2dd8/attachment.vcf>