[Elphel-support] Cascading 359
Oleg K Dzhimiev
oleg at elphel.com
Mon Apr 19 10:18:56 PDT 2010
Hi Andreas,
Unfortunately, there's no progress with cascading. I couldn't make the first
10359 to ignore the repeated programming sequence so far.
Currently I'm busy with making 10359 phases adjustment more stable - changed
a little bit the fpga's clock tree. Also added saving parameters and
auto-restoring them at boot.
Best regards,
Oleg
On 16 April 2010 11:04, Andreas Bean <office at beanbox.com> wrote:
> Hello Oleg,
>
> Any progress with the cascading configuration? Because when it's working
> I will order the additional parts for the cam.
>
> Andreas
>
> Oleg schrieb:
> > Hi, Andreas.
> >
> > So far, I tried cascading them and running fpga configuration twice.
> > It failed - probably because I used a wrong script.
> > I will try to make double configuration work this week.
> > And well, I'm busy with our pano camera currently.
> >
> > Best regards,
> > Oleg
> >
> > On 7 April 2010 02:11, Andreas Bean <office at beanbox.com
> > <mailto:office at beanbox.com>> wrote:
> >
> > Hello Oleg,
> >
> > Have you had time to try connecting 4 sensor boards by cascaded two
> or
> > three 359 ?
> >
> > Andreas
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://support.elphel.com/pipermail/support-list_support.elphel.com/attachments/20100419/400c1d24/attachment-0002.html>
More information about the Support-list
mailing list